Facebook Pixel

Endless Roundslings

Endless Roundslings
View as Grid List

Items 1-24 of 1438

Page
Set Descending Direction
per page
View as Grid List

Items 1-24 of 1438

Page
Set Descending Direction
per page

Endless Roundslings

Roundslings, also written as Round Slings, are an endless loop of yarns covered by a woven tubular jacket. The jacket offers additional durability and flexibility when performing your lift. There is a unique advantage endless polyester roundslings have over eye and eye configuration slings. The endless roundsling is more versatile because the connection and load contact points can be rotated, extending the service life of the sling.


Cuts, Holes, and Tears in Synthetic Slings

Cutting is the most common cause for a sling being taken out of service. All synthetic slings are subject to cutting when lifting items with edges. Edges that come in contact with the sling should be padded with material of sufficient strength to prevent damage to the sling. We recommend using wear pads that give extra protection to the sling where the most wear occurs. Anytime a sling is cut in any way, shape or form it should be removed from service. Holes and tears should be treated the same as cuts. Always use appropriate padding and wear protectors, avoid dragging slings across floors, and avoid pulling slings from under loads.


Ultraviolet Light

Environments where synthetic slings are continuously exposed to ultraviolet light can affect the strength of synthetic slings. Slings left in these conditions could see excess wear and may even totally degrade. Various procedures can be used to minimize the effects of ultraviolet light and sun light:

  • Store slings in a cool, dry, and dark place when not being used for long periods of time.
  • Inspect slings weekly or even more frequently depending on how often slings are used.

Visual indications of ultraviolet degradation are:

  • Sling color is faded or "bleached out".
  • Increased stiffness of sling material.
  • There are surface abrasions in areas not normally in contact with the load.

Slings used in environments where they are subject to continuous exposure to ultraviolet light should be proof tested to two times rated capacity annually, or more frequently depending on severity of exposure.


Improper Sling Loading

Overloading, imbalanced loading, shock loading, and failure to consider hitch, angle and tension effect on rated capacity reduction can reduce the integrity of the sling. Always adhere to rated capacities, and always take into consideration hitch, angle and tension in calculating working load limit. Always build and rig loads so that they are properly balanced and always avoid shock-loading.


Dirt, Grease, and More

Keep dirt, grease, grit, metal chips, and other substances off the sling. Any foreign substance can promote internal abrasion that can reduce sling strength and possibly shorten sling life. Keep slings clean and free of foreign materials to maintain the integrity of the sling.


Temperature

Most web slings and roundslings are not specified for use in temperatures exceeding 194 degrees Fahrenheit or below negative 40 degrees Fahrenheit. For information on lifting solutions in these environments give us a call.


Chemical Exposure

For most lifting applications, the sling material won't make a difference in the quality, capacity, or strength of the roundsling. However, chemically active environments can affect the strength of slings in varying degrees based on the martial of the sling, ranging from little excess wear to total failure. Before ordering slings that are to be used in a chemically active environment, give us a call. In general, Nylon is resistant to many alkalis, and Polyester is resistant to many acids. Again, please call to make sure the sling you are purchasing will be appropriate for your environment.


Care and Storage

Slings should be stored in a clean, dry environment. Slings should be hung from a rack. Be sure to store them in a dark area to prevent exposure to ultraviolent light.